Zennio QUAD Plus, Руководство пользователя

Страница: 13 / 15

QUAD Plus
http://www.zennio.com Technical Support: http://support.zennio.com
13
0x8 (Stop)
0x9 (Inc. by 100%)
…
0xF (Inc. by 1%)
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Long Press] Dimmer ON Sending of 1 (ON)
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Long Press] Dimmer OFF Sending of 0 (OFF)
1 Bit I C T - W - DPT_Switch 0/1 [Ix] [Long Press] Dimmer ON/OFF Switching 0/1
1 Byte C T - - - DPT_SceneControl 0-63 [Ix] [Long Press] Run Scene Sending of 0 - 63
1 Byte C T - - - DPT_SceneControl 128-191 [Ix] [Long Press] Save Scene Sending of 128 - 191
1 Bit O C T R - - DPT_Alarm 0/1
[Ix] [Switch/Sensor] Alarm: Breakdown or
sabotage
1 = Alarm; 0 = No Alarm
2 Bytes C T - - - 9.xxx
-671088.64 -
670760.96
[Ix] [Long Press] Constant Value (float) Float value
2 Bytes C T - - - DPT_Value_2_Ucount 0 - 65535 [Ix] [Long Press] Constant Value (Integer) 0 - 65535
1 Byte C T - - - DPT_Scaling 0% - 100%
[Ix] [Long Press] Constant Value
(Percentage)
0% - 100%
1 Byte C T - - - DPT_Value_1_Ucount 0 - 255 [Ix] [Long Press] Constant Value (Integer) 0 - 255
143, 149, 156, 161 1 Bit C T - - - DPT_Trigger 0/1 [Ix] [Long Press/Release] Stop Shutter Release -> Stop Shutter
144, 150, 157, 162
1 Byte I C - - W - DPT_Scaling 0% - 100% [Ix] [Long Press] Dimming Status (input) 0% - 100%
1 Byte I C - - W - DPT_Scaling 0% - 100% [Ix] [Long Press] Shutter Status (input) 0% = Top; 100% = Bottom
163 1 Byte I C - - W - DPT_SceneControl 0-63 [Motion Detector] Scene Input Scene Value
164 1 Byte C T - - - DPT_SceneControl 0-63 [Motion Detector] Scene Output Scene Value
165, 194, 223, 252 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Luminosity 0-100%
166, 195, 224, 253 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Open Circuit Error 0 = No Error; 1 = Open Circuit Error
167, 196, 225, 254 1 Bit O C T R - - DPT_Alarm 0/1 [Ix] Short Circuit Error 0 = No Error; 1 = Short Circuit Error
168, 197, 226, 255 1 Byte O C T R - - DPT_Scaling 0% - 100% [Ix] Presence State (Scaling) 0-100%
169, 198, 227, 256 1 Byte O C T R - - DPT_HVACMode
1=Comfort
2=Standby
3=Economy
4=Building
Protection
[Ix] Presence State (HVAC)
Auto, Comfort, Standby, Economy, Building
Protection
170, 199, 228, 257
1 Bit O C T R - - DPT_Occupancy 0/1 [Ix] Presence State (Binary) Binary Value
1 Bit O C T R - - DPT_Trigger 0/1 [Ix] Presence: Slave Output 1 = Motion Detected
171, 200, 229, 258 1 Bit I C - - W - DPT_Window_Door 0/1 [Ix] Presence Trigger Binary Value to Trigger the Presence Detection
172, 201, 230, 259 1 Bit I C - - W - DPT_Trigger 0/1 [Ix] Presence: Slave Input 0 = Nothing; 1 = Detection from slave device
173, 202, 231, 260 2 Bytes I C - - W - DPT_TimePeriodSec 0-65535 [Ix] Presence: Waiting Time 0-65535 s.
174, 203, 232, 261 2 Bytes I C - - W - DPT_TimePeriodSec 1-65535 [Ix] Presence: Listening Time 1-65535 s.
175, 204, 233, 262 1 Bit I C - - W - DPT_Switch 0/1 [Ix] Presence: Enable According to parameters
176, 205, 234, 263 1 Bit I C - - W - DPT_Switch 0/1 [Ix] Presence: Day/Night According to parameters