Zennio MINiBOX 20, Руководство пользователя

Страница: 17 / 18

MINiBOX 20
http://www.zennio.com Technical Support: http://support.zennio.com
17
88, 96
1 Bit I C - - W - DPT_BinaryValue 0/1 [Ox] On/Off N.O. (0=Open Relay; 1=Close Relay)
1 Bit I C - - W - DPT_BinaryValue 0/1 [Ox] On/Off
N.C. (0=Close Relay; 1= Open
Relay)
89, 97 1 Bit O C T R - - DPT_BinaryValue 0/1 [Ox] On/Off (Status) 0=Output Off; 1=Output On
90, 98 1 Bit I C - - W - DPT_Enable 0/1 [Ox] Lock 0=Unlock; 1=Lock
91, 99 1 Bit I C - - W - DPT_Start 0/1 [Ox] Timer 0=Switch Off; 1=Switch On
92, 100 1 Bit I C - - W - DPT_Start 0/1 [Ox] Flashing 0=Stop; 1=Start
93, 101
1 Bit I C - - W - DPT_Alarm 0/1 [Ox] Alarm 0=Normal; 1=Alarm
1 Bit I C - - W - DPT_Alarm 0/1 [Ox] Alarm 0=Alarm; 1=Normal
94, 102 1 Bit I C - - W - DPT_Ack 0/1 [Ox] Unfreeze Alarm
Alarm=0 + Unfreeze=1 => End
Alarm
95, 103 1 Bit O C T R - - DPT_State 0/1 [Ox] Warning Time (Status) 0=Normal; 1=Warning
104 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Shutter] Scenes
0 - 63 (Execute 1 - 64); 128 - 191
(Save 1 - 64)
105 1 Bit I C - - W - DPT_UpDown 0/1 [Cx] Move 0=Raise; 1=Lower
106
1 Bit I C - - W - DPT_Step 0/1 [Cx] Stop/Step 0=Stop/StepUp; 1=Stop/StepDown
1 Bit I C - - W - DPT_Trigger 0/1 [Cx] Stop 0=Stop; 1=Stop
107 1 Bit I C - - W - DPT_Enable 0/1 [Cx] Lock 0=Unlock; 1=Lock
108 1 Bit O C T R - - DPT_Switch 0/1 [Cx] Rising Relay (Status) 0=Opened; 1=Closed
109 1 Bit O C T R - - DPT_Switch 0/1 [Cx] Lowering Relay (Status) 0=Opened; 1=Closed
110 1 Byte O C T R - - DPT_Scaling 0% - 100% [Cx] Shutter Position (Status) 0%=Top; 100%=Bottom
111 1 Byte O C T R - - DPT_Scaling 0% - 100% [Cx] Slats Position (Status) 0%=Open; 100%=Closed
112 1 Byte I C - - W - DPT_Scaling 0% - 100% [Cx] Shutter Positioning 0%=Top; 100%=Bottom
113 1 Byte I C - - W - DPT_Scaling 0% - 100% [Cx] Slats Positioning 0%=Open; 100%=Closed
114
1 Bit I C - - W - DPT_Alarm 0/1 [Cx] Alarm 0=No Alarm; 1=Alarm
1 Bit I C - - W - DPT_Alarm 0/1 [Cx] Alarm 0=Alarm; 1=No Alarm
115
1 Bit I C - - W - DPT_Alarm 0/1 [Cx] Alarm 2 0=No Alarm; 1=Alarm
1 Bit I C - - W - DPT_Alarm 0/1 [Cx] Alarm 2 0=Alarm; 1=No Alarm
116 1 Bit I C - - W - DPT_Ack 0/1 [Cx] Unfreeze Alarm
Alarm=0 + Unfreeze=1 => End
Alarm
117 1 Bit I C - - W - DPT_Scene_AB 0/1 [Cx] Move (Reversed) 0=Lower; 1=Raise
118 1 Bit I C - - W - DPT_Ack 0/1 [Cx] Direct Positioning 0=No Action; 1=Go to Position
119 1 Bit I C - - W - DPT_Ack 0/1 [Cx] Direct Positioning 2 0=No Action; 1=Go to Position
120 1 Bit I C - - W - DPT_Ack 0/1 [Cx] Direct Positioning (Save)
0=No Action; 1=Save Current
Position
121 1 Bit I C - - W - DPT_Ack 0/1 [Cx] Direct Positioning 2 (Save)
0=No Action; 1=Save Current
Position