MINiBOX 0-10V X3/X2/X1
Technical Support:
14
2.6
LOGIC FUNCTIONS
This module makes it possible to perform numeric and binary operations to incoming
values received from the KNX bus, and to send the results through other communication
objects specifically enabled for this purpose.
The MINiBOX 0-10V devices can implement
up to 10 different and independent
functions
, each of them entirely customisable and consisting of
up to 4 consecutive
operations each
.
The execution of each function can depend on a configurable
condition
, which will be
evaluated every time the function is
triggered
through specific, parameterizable
communication objects. The result after executing the operations of the function can also
be evaluated according to certain
conditions
and afterwards sent (or not) to the KNX
bus, which can be done every time the function is executed, periodically or only when
the result differs from the last one.
Please refer to the specific
“
Logic Functions
” user manual (available in the MINiBOX
0-10V product sections at the Zennio homepage,
) for detailed
information about the functionality and the configuration of the related parameters.
