MAXinBOX SHUTTER 4CH / 8CH
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
11
2.3
LOGIC FUNCTIONS
This module makes it possible to perform numeric and binary operations to incoming
values received from the KNX bus, and to send the results through other
communication objects specifically enabled for this purpose.
MAXinBOX SHUTTER 4CH / 8CH can implement
up to 20 different and independent
functions
, each of them entirely customisable and consisting in
up to 4 consecutive
operations each one
.
The execution of each function can depend on a configurable
condition
, which will be
evaluated every time the function is
triggered
through specific, parameterisable
communication objects. The result after executing the operations of the function can
also be evaluated according to certain
conditions
and afterwards sent (or not) to the
KNX bus, which can be done every time the function is executed, periodically or only
when the result differs from the last one.
Please refer to the specific “
Logic Functions in MAXinBOX SHUTTER
” user manual
(available at the Zennio homepage,
www.zennio.com
) for detailed information about
the functionality and the configuration of the related parameters.
