Zennio inBOX DIM, Техническая документация

Страница: 2 / 4

© Zennio Avance y Tecnología S.L. Edition 1 Further information www.zennio.com
Page 2 / 4
SUPPORTED LOADS
▪
R = Resistive
▪
L = Inductive
▪
C = Capacitive
▪
CFL = Dimmable Compact Fluorescent Lamps
▪
LED = Dimmable LED lamps
LOAD COMBINATION
▪
If combining resistive (R) with inductive (L) loads, please do not exceed a 50% share
for the resistive load.
▪
If combining resistive (R) with capacitive (C) loads, please do not exceed a 50%
share for the resistive load.
▪
NEVER connect capacitive loads and electronic transformers with inductive
loads in the same channel.
▪
Do not combine in the same channel CFL or LED lamps with R L C loads.
▪
It is not advisable to combine different models of CFL lamps, LED lamps or
transformers in the same channel since correct operation can be affected.
OVERHEATING PROTECTION
▪
When the ambient temperature is too high the universal
dimmer actuator will regulate itself, at a maximum of 20%.
▪
Once the ambient temperature decreases, the dimmer will
resume normal operation. Please, refer to user manual.
INPUTS SPECIFICATIONS AND CONNECTIONS
CONCEPT DESCRIPTION
Number of inputs 2
Inputs per common 2
Operation voltage +3.3VDC in the common
Operation current 1mA @ 3.3VDC (per input)
Maximum impedance
Approx. 3.3kΩ
Switching type Dry voltage contacts between input and common
Connection method Screw terminal block
Maximum cable length 30m
NTC probe length 1.5m (up to 30m)
NTC accuracy (@ 25ºC) ±0.5ºC
Temperature resolution 0.1ºC
Cable cross-section 0.5mm² to 1mm² (20-16AWG)
Maximum response time 10ms
Any combination of the next accessories is allowed in the inputs
:
Temperature
probe references:
ZN1AC-NTC68E
ZN1AC-NTC68F
ZN1AC-NTC68S
ZAC-SQAT-W/S/A
Up to two motion sensors
can be plugged into the
same device input
(parallel wiring)
Motion sensor cable
screw terminal.
Motion sensor reference:
ZN1IO-DETEC-P
(1)
ZN1IO-DETEC-X
Temperature Probe
Motion Sensor
Switch/Sensor/
Push Button
(1) The micro switch number 2 in the ZN1IO-DETEC-P sensor must be in Type B position to work properly.
Motion sensor reference:
ZN1IO-DETEC
ZN1IO-DETEC-N
ZN1IO-DETECT-P
(1)
R L C CFL LED
NOT!