© Zennio Avance y Tecnología S.L.
Ed. 4
For more info
Page
2
/
3
ASSEMBLY OF FRAME (MULTIPLE-COLUMN LAYOUT)
1
Please remove the blind panels and the additional modules. After
that, assemble the additional module enclosures, opening the gaps
previously. Then, fix the assembly using the supplied parts and screws.
Move the microphone to the lower module.*
2
Place the metallic parts supplied with the frame. Put the assemblies
inside the flush-mount box, pass previously the bus through the gaps
and recover the cables.
3
Fix the assemblies to the flush-mount boxes with screws.
4
Make the connections of the basic unit and prepare the additional
modules. Pass the bus cables through the gaps.
5
Interconnect the additional modules with the bus as indicated in the
schema and then, fix the additional modules with the supplied screws.
6
Place the frames and fix them by using the supplied Allen key.*
*In case of acoustic deficiencies, Zennio may supply a modified frame for whose installation step number 1 should be ignored. In such case,
though, it is essential that the microphone remains properly connected.
