EyeZen TP v2
Technical Support:
8
2.2
MOTION DETECTOR
EyeZen TP v2 incorporates six independent motion detection channels, two more for
constant light control and one for occupancy detection.
Motion detection
consists in sending objects to the bus whenever the device
observes a moving body (or no longer observes it) in the environment of the
room where it has been installed.
Constant light control
consists in sending KNX orders to the dimmer device
that controls the in-room luminaries so the ambient light level remains constant
even if other light sources are present.
Occupancy detection
is an algorithm that allows determining whether a
particular space is under occupation no matter if the occupant moves or not
(i.e., no matter if the device is detecting motion in the room or not).
It also allows setting different luminosity setpoints or object types for
daytime
and night
time
as well as activating or deactivating the
motion indicator LEDs
.
EyeZen TP v2 can also set custom
sensitivity
of the motion sensor and measure the
luminosity
of the room by making certain adjustments. This measurement will be made
according to the
color of lens
selected.
Please refer to the specific manual “
Presence Detector
” available in EyeZen TP v2
product section at the Zennio website (
) for detailed information about
the functionality and the configuration of the related parameters. Please note that
references to presence detection in this manual in this case correspond to motion
detection.
