©2013
DJI Innovations. All Rights Reserved.
18
Assistant Software Installation and Usage
step1:
Make sure the driver is installed correctly, which has been installed before you use WKM
，
ACE ONE or
ACE WAYPOINT.
step2:
Please download the assistant software installer from
DJI Innovations
website.
step3:
Double click the assistant software installer file and follow the steps to finish installation.
step4:
Run the assistant software.
step5:
Please upgrade the firmware or configure the parameters according to the assistant software indication if
necessary.
Test
Check Before Flight
Notes:
The gimbal is installed firmly to landing gear, and camera mounted correctly and stably.
All cables are in correct connection, without anyone in backwards.
The gimbal video power cable is in good soldered condition if wireless video transmission module used.
Correct TX settings.
Camera shutter control module is correctly mounted.
Correct camera setups.
Correct connection between GCU and RC receiver.
Normal connection between GCU and flight control system.
Upgrade Flight control System MC Firmware.
Tips:
The gimbal LED flashing red quickly when the camera and gimbal connection fails.
The gimbal LED stays solid green when the camera and gimbal is successful connection.
Please turn to the
Trouble Shooting in Appendix if abnormal situation occurs.
