Zenith ZLD15A1B, Руководство по обслуживанию

Страница: 8 / 34

CM154 - 923-03495
8
ZLD15A1B - OVERVIEW
OVERVIEW
Mode Resolution
Horizontal
Frequency (KHz)
Vertical
Frequency (KHz)
640x400 31.5KHz 70Hz
640x400 37.9KHz 85Hz
640x480 31.5KHz 60Hz
640x480 35.0KHz 67Hz
640x480 37.9KHz 72Hz
640x480 37.5KHz 75Hz
640x480 43.3KHz 85Hz
720x400 31.5KHz 70Hz
800x600 35.2KHz 56Hz
800x600 37.9KHz 60Hz
800x600 48.1KHz 72Hz
800x600 46.9KHz 75Hz
800x600 53.7KHz 85Hz
(MAC)
832x624 49.7KHz 75Hz
1024x768 48.4KHz 60Hz
1024x768 56.5KHz 70Hz
1024x768 60.2KHz 75Hz
1024x768 68.67KHz 85Hz
XGA
SVGA
VGA
Computer Video Modes
COMPUTER CONNECTIONS
VIDEO MODES
This TV has been pre-adjusted to use XGA 1024x768,
60Hz format. If possible, use an XGA format to obtain
the best image quality for your TV/LCD monitor. If set
up under lower resolutions, a distorted picture may
appear on the screen. If set to Vertical frequency 85Hz,
some noise can be seen when PIP is on. In this case,
set the Vertical frequency to 60Hz.
If the message “OUT OF RANGE” appears on the screen,
adjust the PC output to a format listed in the chart
below.
When the PC is in the power saving mode the monitor
automatically switches to DPM (Display Power
Management) mode.
MENU ADJUSTMENTS
Use the menu button to select the Special Menu. Press
the volume up and then use the channel up/down
buttons to select the PC option.
Press the volume up and then use the up/down buttons
to select an option you want to adjust. Each press of
up/down buttons changes the screen display.
Press the volume (G) and then use the volume up/
down buttons to make appropriate adjustments.
H-position V-position
Auto configure Phase
Clock Reset
PC Setup
(H-position)
G
(V-position)
G
Clock
G
Phase
G
Auto configure
G
Reset
G
0
(H-position)
G
Move Next Back
H-POSITION/V-POSITION
This function adjusts picture left/right and up/down.
The adjustment ranges are -100 - +100 / -30 - +30.
CLOCK
This function minimizes any vertical bars or stripes
appearing on the screen background. The adjustment
range is -30 to +30.
PHASE
This function allows you to remove any horizontal
noise and clear up or sharpen the character images.
The range adjustment is -15 to +15.
AUTO-CONFIGURE
This function is for the automatic adjustment of the
screen position, clock and clock phase. (An image
will display and disappear for a few seconds while
Auto-configuration is in progress.)
RESET
This function allows you to return to the default
settings programmed at the factory (default settings
cannot be changed).