Zenith Z42PX21D, Инструкция по установке и эксплуатации

Страница: 22 / 60

22 Plasma TV
Operation
206-4022
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the , TV / VIDEO , CH ( D
/
E ) button on the TV or press the POWER ,
TV INPUT , TV / VIDEO , CH (
D
/
E
) , Number (0 ~ 9) button on the remote control.
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
D
/
E
button to select the
OPTION
menu.
2. Press the G button and then use
D
/
E
button to select
Language
.
3. Press the
G
button and then use D
/
E button to select your desired language.
From this point on, the on-screen menus will be shown in the selected lan-
guage.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Notes:
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
• Without CableCARD
TM
: Illuminates red in standby mode, Illuminates green when the TV is turned on.
• Inserting the CableCARD TM : Illuminates orange in standby mode, Illuminates green when the TV is turned on.
2. Select the viewing source by using TV/VIDEO button on the remote control.
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
TV Setup
TV Setup
On-screen Menus Language Selection
On-screen Menus Language Selection
Operation
Operation
T
T
urning the TV On
urning the TV On
* In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an
example to help you with the TV operation.