15
VCR SETUP
SETUP MENU FEATURES AND OPERATION
CLOCK
PROGRAM
TUNING
SETUP
SELECT
TO EXIT PRESS
ENTER
FUNCTION OSD :
ON
LANGUAGE SELECT:ENGLISH
AUDIO MODE:
HI-FI
BROADCAST TYPE: STEREO
AUDIO OUTPUT:
STEREO
SELECT
TO EXIT PRESS
ADJUST
SETUP MENU
Use
D
D
or
E
E
to choose a
desired option on the
SETUP menu. Then use
F
F
or
G
G
to choose a
desired setting.
The onscreen display of this VCR can be turned on or off.
The onscreen programming menus of this VCR can be displayed
in either English, Spanish, or French.
The VCR has two separate audio playback systems, the high quality
VHS Hi-Fi system and standard NORMAL mono system. The same
audio is generally recorded on both systems. The VHS Hi-Fi system
plays on separate (left and right) channels, and the NORMAL system
plays monaural sound. The normal track is always played so the
cassette can be played on a VCR that does not have VHS Hi-Fi.
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display
to the desired position when both MTS stereo and SAP signals
are received. When only one of the MTS signal is received, the
VCR automatically selects the corresponding receiving mode
(Stereo or SAP) regardless of the selected position.
For normal operation, the display should be in the STEREO posi-
tion. The VCR will then record a STEREO program when available,
and record a mono program if the program is NOT IN STEREO.
•
For weak STEREO and/or SAP broadcasts, changing the dis-
play to mono may give clearer sound.
Used during playback [when AUDIO MODE display (HI-FI/NOR-
MAL) is in HI-FI position] for selecting the audio output signals from
the AUDIO OUT terminals (L ch and R ch), and VHF/UHF/CATV.
This display setting should normally be left in the stereo position,
so that when a stereo tape is played, the stereo sound will be
heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
AUDIO OUTPUT DISPLAY (STEREO/LEFT/RIGHT)
BROADCAST TYPE DISPLAY (STEREO/SAP/MONO)
AUDIO MODE DISPLAY
LANGUAGE SELECT
FUNCTION OSD
Go to the AUDIO MODE option and select HI-FI or NORMAL
using
F
F
or
G
G
.
Go to the BROADCAST TYPE option and select STEREO,
SAP, or MONO using
F
F
or
G
G
.
Go to the AUDIO OUTPUT option and select STEREO, LEFT,
or RIGHT using
F
F
or
G
G
.
Go to the LANGUAGE SELECT option and select ENGLISH,
SPANISH, or FRENCH using
F
F
or
G
G
.
Set up the FUNCTION OSD option by selecting ON or OFF
using
F
F
or
G
G
.
MAIN MENU
