Flash Synchronization
Electronic flash only at 1/30th sec. through a standard 3mm co-axial -- socket.
Viewing/Focusing system
Eye-level pentaprism/instant return mirror shows upright laterally correct image.
Bright Fresnel focusing screen with central ground glass/microprism spot.
Exposure meter
Built- in CdS cell with needle coincidence through viewfinder, calibrated for 6-500 ASA /l 3--
28 DIN. Power source Mallory or Ever Ready PX625 Battery.
4www.butkus.org
(Should be replaced once a year.)
Frame counter
Additive 0--36 manual resetting type.
4www.butkus.org
Standard Lens
-Helios 44M 58mm focal length
Construction
- 6 elements in 4 groups
Diaphragm type
-Fully automatic instant re-open Optional manual over-ride
Aperture Range
- f/2-f/16 with click stops at full and half apertures (except between f/11 and f/16)
Distance Scale
-0.55-Infinity
Angle of View
- 40degrees
Filter Size
- 52mm screw 54mm push-on
4www.butkus.org
Lens mount
-'Universal' (42mm) thread accepts standard single pin automatic lenses and accessories
Loading your camera
Precautions:
(a) Your Zenith camera accepts any standard 35mm cassette, of color or black and white film.
(b) Always load the film in subdued lighting conditions, If outdoors, look for a shady area or shield the camera
from direct sunlight with your body or coat.
(c) Whenever possible avoid loading in a dusty place or at the seaside where strong salty wind is blowing.
(d) When loading take care not to touch the shutter blinds.
(e) Make sure Shutter Release has not been set in the '1 (or Time) Lock position. (See p.12)
Procedure:
1.Raise the Back Lock-catch
(16)
and swing the Camera
Back
(27)
open.
4www.butkus.org
2. Before loading ensure rewind release mechanism has
been cleared. The Rewind Release Ring (4) must be
turned clockwise so that the three dots are fully lined up.
Turn Film Transport Lever (2) through a couple of short
