Zenith Presentation PRO900X, Руководство по эксплуатации

Страница: 9 / 36

206-3275-A
Projecting a Picture
1. Press Mode repeatedly on remote to select TV mode.
2. Point remote toward HD Display screen, press POWER to
turn HD Display on. (Be sure all video sources are also
turned on.)
3. Press Trackball down to place cursor on the HD Display
screen.
4. Rotate trackball toward top of screen until Source menu
appears, select the video source you want to project.
5. Make any necessary on-screen adjustments using the
Setup and Video Menus.
6. When finished using the HD Display, select TV mode,
press POWER to turn the HD Display off.
Audio Amplifier Note:
Reference is made to an audio amplifier. The user-supplied
audio amplifier may be a stereo system. In that case, connect
Right and Left Audio Out from the video source you are using
to Right and Left Audio In on the audio amplifier.
USERS QUICK REFERENCE GUIDE
SETUP CHECKLIST
Turn on all system components including the
video source you intend to watch; video source
is the video equipment connected to the HD
Display connection center.
Turn on the HD Display.
Select a video source from one of the video
inputs provided on the connection center: Video
In, S-Video In, or RGB input jacks.
Set the HD Display internal clock.
The internal clock must be set before the Timer
Menu option will appear in the Setup Main Menu.
Select English, Spanish, French, or German for on-
screen menus.
Use other options (fine-tune video image).
BASIC OPERATION: PROJECTING A PICTURE (Remote operates HD Display in TV mode)
Once the HD Display has been installed and set up,
follow these simplified instructions for operation.
Be sure to install batteries in the remote.
mode
mute
flshbk
source
enter
menu
record
quit/
pause
pip
rew
stop
ffwd
play
1
2
3
4
5
6
7
8
0
9
surf
power
tv
vcr
cable aux 1
aux 2
vo
lu
m
e
ch
an
ne
l
1/6
3/4
2
6
P A G E 9