OPERA
TION
11
Presetting the radio stations
You can preset 50 stations for FM and AM. Before
tuning, make sure that you have turned down the
volume to the minimum.
11
Press TUNER/BAND to select the FM or AM
you want in the display window.
Every time you press TUNER/BAND, FM and AM
changes alternately.
22
Press TUNING
(
)
on the front panel
until the frequency indication starts to change,
then release.
Scanning stops when the unit tunes in a
station.
otes
•
Tuning in automatically
Press
TUNING
(
) for more than 0.5 seconds.
•
Tuning in manually
Press
TUNING
(
) briefly and repeatedly.
33
Press PROGRAM/MEMORY on the front panel.
A preset number will flash in the display window.
44
Press PRESET
(
)
(or PRESET (
)
on the remote control) to select the preset
number you want.
55
Press PROGRAM/MEMORY.
- The station is stored.
66
Repeat steps 3 to 6 to store other stations.
To clear all the memorized stations
Press and hold
PROGRAM/MEMORY
on the front panel
for about two seconds, “CLEAR” appears in the display
window and then press
CLEAR
, the stations are
cleared.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
a preset number will flash. To change the preset number,
follow the steps 5-6.
To recall presets
Press and hold
PRESET
(
) (or
PRESET (
)
on the remote control) until the desired preset number
appears or press it repeatedly.
/
/
11
Press TUNER/BAND to select the FM or AM
you want in the display window.
The last received station is tuned in.
22
Press PRESET
(
)
(or PRESET (
)
on the remote control) repeatedly to select the
preset station you want.
- Each time you press the button, the unit tunes in
one preset station at a time.
3
Adjust the volume by pressing VOLUME CON-
TROL KNOB on the front panel or VOLUME
(
) on the remote control repeatedly.
To listen to non-preset radio stations
• Use manual or automatic tuning in step 2.
• For automatic tuning, press and hold
TUNING
(
) on the front panel.
To turn OFF the radio
Press
POWER
to turn the unit off or select another
function mode (CD, TAPE or AUX).
For your reference
•
If an FM program is noisy
Press
MODE/RIF
so that “STEREO” disappears in
the display window. There will be no stereo effect,
but the reception will improve. Press
MODE/RIF
again to restore the stereo effect.
•
To improve reception
Reposition the supplied antennas.
otes
• Use MODE/RIF (Radio Interference Filter) function to
switch to mono reception if stereo reception is distort-
ed by noise.
• When recording the MW(AM)broadcast, beat noises
may occur. If it does, press
MODE/RIF
once.
/
/
Listening to the radio
