Zenith L15V26B, Инструкция по установке, настройке и эксплуатации

Страница: 42 / 56

Audio/Sound Setup
42
206-3839
* Select sound mono mode if the signal is not clear or in poor signal reception areas.
* STEREO and MONO modes are available only if included on the broadcast signal.
On-screen display in stereo mode : STEREO
On-screen display in bilingual mode : SAP
* Bilingual (second audio program) signal
●
This signal contains the secondary language signal in addition to the primary language.
●
There are primary and secondary language and stereo modes in bilingual signals.
●
[MONO] : The primary language is heard from left and right speakers in mono sound.
●
[STEREO] : The primary language is heard from left and right speakers in stereo sound.
●
[SAP] : The secondary language is heard from both left and right speakers in mono sound.
Mono Stereo SAP
Selecting Bilingual Signal (Second
Selecting Bilingual Signal (Second
Audio Program)
Audio Program)
1 Use the mts button to select MTS mode.
3
Press the enter (
A
) button.
2
Use the mts button or volume ( F
,
G ) buttons to
change the audio mode.
●
Each press of volume ( F
,
G ) buttons changes the
audio mode as shown below.
MTS
Mono
F F G G