VIDEO /
AUDIO
35
206-3825
- Select Mono sound mode if the signal is not clear or in poor signal reception areas.
- STEREO and SAP modes are available only if included on the broadcast signal.
On-screen display in stereo mode : STEREO
On-screen display in bilingual mode : SAP
- Bilingual (second audio program) signal
●
This signal contains the secondary language signal in addition to the primary language.
●
There are primary and secondary languages and stereo modes in bilingual signals.
●
[MONO] : The primary language is heard from left and right speakers in mono sound.
●
[STEREO] : The primary language is heard from left and right speakers in stereo sound.
●
[SAP] : The secondary language is heard from both left and right speakers in mono sound.
Mono
Stereo
SAP
SAP
SAP
(Second
(Second
Audio Program) Bilingual Signal Setup
Audio Program) Bilingual Signal Setup
1
Press the
mts
button on the remote control.
3
Press the
enter
(
A
) button to save.
2
Use the
mts
button to change the audio mode.
●
Each press of
mts
changes the audio mode as shown below.
