Zenith HE20D50DT, Инструкция по установке и эксплуатации, Гарантия

Страница: 28 / 44

Item Description Range Fact. Set Recommend. Setting
00 FACT MENU 0 - 1 0 Leave default set 0
01 PRESET PX 0 - 1 1
02 PRESET AX 0 - 1 1 Leave default set 1
03 POWER MANAGE 0 - 7 0
04 VERT POS 0 - 25 15
05 HORZ POS 0 - 45 15
06 BAND/AFC 0 - 7 0
07 MIN VOLUME 0 - 63 0
08 MAX VOLUME 0 - 63 63
09 AC ON 0 - 1 0
10 KEY DEFEAT 0 - 1 1
11 STRT CHANNEL 0 - 255 255
12 STRT VOLUME 0 - 63, 255 255
13 HOSPITAL MODE 0 - 2 2
14 CHAN LOCK 0 - 1 0
15 GHOST CH. 0 - 1 0
16 SCAN MODE 0 - 1 1
17 TEXT MODE 0 - 1 1
18 SLEEP TIMER 0 - 1 1
19 ALARM 0 - 1 0
20 CH. OVER RIDE 0 - 1 1
21 OLD OCV 0 - 1 0
22 CAPTION LOCK 0 - 1 0
23 FUNCTION PRE 0 - 1 0
24 FEATURE LEVEL 0 - 1 1 Zen1/0 PLbl Leave default set 1 (1 Zen 1)
P A G E 2 8
206-3684-0
Installer Menus
Installer should leave item 00 FACT MODE
set to 0 and item 24 set to 1 (defaults).
Items 25-81 are installer-type adjustments
and only qualified technicians having spe-
cialized test equipment should access them.
Use the Installer’s Menus to make TV operation adjustments
1480-01 1.11 01
03 POWER MANAGE 0
XX/XX/XX TE = 10110000
Accessing the Installer’s Menu
Installer’s menus can be accessed by using the optional installer’s remote
control. Just press and hold MENU (about 8 seconds) until the display
changes, then press 9, 8, 7, 6, then ENTER. To exit the Installer’s Menu,
press ENTER again.
Changes you make will be stored in nonvolatile memory.
The Installer’s Menu opens with item 03, POWER MANAGE. Press the
SELECT key to sequence through the various items. Or, access an item
directly by entering the line number, then pressing MENU. For example, to
access the Start Channel option which is on line 11, press 11, then MENU.
To change a current setting use the Left/Right ADJ keys.
Using the Installer’s Menu
Items 00-24 are immediately accessible only upon entering the Installer’s
Menu. Their numbers, descriptions, ranges, factory default settings, and a
place for listing any changes made on-site are given below. A second sec-
tion of the Installer’s Menu that is intended for qualified service techni-
cians only is not shown (items 25-81). Normally these items do not
require adjustment.
Items in the Installer’s Menu: