8
Connections
Speaker System Connection
Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the
cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).
R
L
L
+
-
R
+
-
Left speaker
Right speaker
Red
Red
Black
Notes
• Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on
the speakers.
• Do not disassemble the front cover of supplied speaker
.
Antenna (Aerial) Connections
Connect the supplied FM/AM antennas for listening to the radio.
• Connect the AM loop antenna to the AM antenna connector.
• Connect the FM wire antenna (or FM “T” antenna) to the FM 75Ω/300Ω coaxial connector.
Notes
• To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
OPTICAL (Digital audio out jack) connection
(OPTIONAL)
Connecting to an amplifier equipped with two channel analog
stereo or Dobly Surround.
11
Connect the unit’s DIGITAL AUDIO OUT jacks (OPTICAL) to
the corresponding in jack on your amplifier. Use an optional
digital (optical) audio cable.
2
2
You will need to activate the player’s digital output. (See
“Digital Audio Output” on page 11).
R
L
Amplifier
L
R
AUDIO INPUT
DIGITAL INPUT
OPTICAL
COAXIAL
Position
it for the
best
reception
FM indoor
antenna(aerial)
FM external
antenna(aerial)
(not supplied)
FM external
antenna(aerial)
(not supplied)
FM 75
AM
For AM(MW) reception, connect
the loop antenna (aerial) to the
terminal marked AM
AM(MW) loop
antenna (aerial)
300 coaxial cable
AM
AM loop antenna (aerial)
FM
(Supplied)
