Zenith F-DV25, Инструкция по установке и эксплуатации

Страница: 13 / 52

BEFORE OPERATION PAGE 13
Setting the Clock
Press the CLOCK button. (If the clock is already
set, press and hold the CLOCK button for more
than 2 seconds.) - The hours begin to flash.
Select a 24 hour cycle or 12 hour cycle by using
the PRESET (-/+) buttons.
Press the SET button to confirm the selected
hour cycle.
Use the PRESET (-/+) buttons to set the correct
hours.
Press the SET button.
Use the PRESET (-/+) buttons to set the
correct minutes.
Press the SET and the correct time is shown on
the display.
Press the CLOCK button at any time to display
the time for about 3 seconds.
(12HR) or
(24HR)
1
2
3
4
5
6
7
8
You must set the time for the Sleep and Timer function.
SET
PRESET
(-/+)
CLOCK
To specify the time until the power is
turned off, press the SLEEP button.
In the display you can see for about
5 seconds. This means that the system turns off
automatically after 90 minutes.
Each time the button is pressed the time interval
before it turns off is reduced by 10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
To check the remaining time until the
power is turned off.
While the sleep function is active press the
SLEEP button briefly. The time remaining until it
turns off is displayed for about 5 seconds.
If you press the SLEEP button while the sleep time is dis-
played, the SLEEP time is reset.
To cancel the sleep timer mode:
If you wish to stop the function press the SLEEP
button repeatedly until 10 appears, and then
press the SLEEP button once again while 10 is
displayed.
When the sleep timer is used, the power is automatically
turned off after the specified time has elapsed.
Sleep Function
POWER
MUTE
TUNER DVD/CD TAPE AUX
MDSS SLEEP
TITLE SUBTITLE
SLOW
MARKER
ANGLE ZOOM
REV
FWD
SEARCH
VOLUME
A-B CLEAR
SELECT STEP STOP
PREV. NEXT PROGRAM
REPEAT
SELECT/ENTER
EQ SOUND AUDIO
DISPLAY RETURN
SET UP MENU
RANDOM
PRESET
1 2 3 4 5
6 7 8 9 0
TAPE
DVD
CD
SLEEP
1
2
3
Note