INSTRUCTIONS FOR LOADING
(see p. 14 f or Zenith E)
The camera can be loaded in normal lighting conditions. Open the back cover of the camera by pulling the lock-
catch upwards. Next, pull the film-rewind wheel upwards and inset (the film cassette).
Note. While cocking the shutter, check whether the film rewind wheel rotates. If not, check whether the camera
is correctly loaded with film. Finally, turn the exposure-counter dial and set the figure 'O' to align with the index
dot on the ring. Set the exposure counter when the shutter
Now fix the leading edge of the film under the take-up
spool spring and engage on the spool tooth and film
sprocket. Ensure that the film is guided correctly over
the film-channel runners. Replace the cassette into its
seat. Return the rewind wheel to its original position.
Close the back cover by pressing down the lock-catch.
Advance the shutter setting lever to the stop position:
then press the release button. As the lever turns, the
film is advanced by the space of one shot. To transport
non-exposed film to the film aperture: cock the shutter
twice: pressing the release button after each cocking:
Содержание E
Страница 6: ......
