20
Pre-operation Setup
Menu Operation
In this menu system, there are several ways to cus-
tomize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu sys-
tem will appear on the TV screen. The third level can be
displayed by pressing
B
. For navigating the menu lev-
els, you will see “
B
” on the right side of the menu label
to help you go to the next level.
To bring up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press
B
on the Remote Control.
To go back to the previous level:
Press
b
on the Remote Control.
Standard Menu Operation
11
Press SETUP.
The Setup menu appears.
2
2
Use
v
/
V
to select the desired option.
3
3
While the desired item is selected, press
B
to
move to the second level.
4
4
Use
v
/
V
to select the second desired option.
5
5
Press
B
to move to the third level.
6
6
Use
v
/
V
to select the desired setting then
press ENTER to confirm your selection.
Some items require additional steps.
77
Press SETUP to exit the Setup menu.
GENERAL
Tuning Band Select
11
Press SETUP.
The Setup menu appears.
2
2
Use
v
/
V
to select the GENERAL option.
3
3
While the GENERAL option is selected, press
B
to move to the second level.
4
4
Use
v
/
V
to select the Tuning Band option.
5
5
Press
B
to move to the third level.
6
6
Use
v
/
V
to select the tuning band option (TV
or CATV) then press ENTER.
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
EZ Channel Scan
This DVD Recorder is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Channel Search:
Connect the DVD Recorder to the desired type of antenna or
cable TV system, as shown in Connecting Antenna/Cable TV
to DVD Recorder on page 16.
11
Press SETUP.
The Setup menu appears.
2
2
Use
v
/
V
to select the General option.
3
3
While the General option is selected, press
B
to
move to the second level.
4
4
Use
v
/
V
to select the EZ Channel Scan option.
5
5
Press
B
to move to the third level.
“Start” icon is highlighted.
6
6
Press ENTER to begin the channel search.
The tuner will automatically cycle through all avail-
able channels in the area (cable or antenna) and
place them in the tuner’s memory.
Searching 11%
Stop
Tuning Band
EZ Channel Scan
Ch. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
Factory Set
CATV
TV
Tuning Band
EZ Channel Scan
Ch. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
Factory Set
Содержание DVR413
Страница 63: ...REFERENCE 63 Notes...
