Zenith DVD5201, Руководство по обслуживанию

Страница: 11 / 51

VR166 - 923-03461
11
DVD2 - SERVICING
MECHANISM
1 ) Release 3 Screws(S1).
2 ) Unlock The Connectors (C1), (C2) from the Hook(H1).
1-1. Plate Clamp
1 ) H o l d a n d f i x t h e U p p e r C l a m p u n d e r the Holder
Assembly Clamp, and then turn the Plate Clamp to the
counterclockwise direction(arrow(A)).
1-2. Magnet Clamp
1-3. Upper Clamp
1-4. Holder
Clamp
¥ When reassembling, hold and fix the Upper Clamp as
above No. 1-1(1), and then turn the Plate Clamp to the
clockwise direction.
2. Base Assembly T ray(Fig. 4-1)
1 ) T urn the portion to the direction of arrow(B) to move
the Base Assembly T ray in front of you.
2 ) Push down two Locking T abs(L1) located to both sides
of the Base Main, and then pull the Base Assembly
T ray in fornt of you.
2-1. T ray Disc(Fig.4-2)
1) Release Screw(S2).
¥ Put the Base Assembly T ray face down(Bottom side).
2-2. Roller Base T ray
1) Unlock the two Locking T abs(L2).
2-3. PCB Assembly T ray
1) Release two Screws(S3).
2) Unconnect the Connector(C3).
¥ Put the Base Assembly T ray on original position(T op Side).
2-4. Motor Assembly T ray
1) Release 2 Screws(S4).
2-5. Gear T ray
2-6. Gear Wheel T ray
2-7. Base T ray
(L1)
(A)
(S1)
(S1)
(S1)
HOLDER CLAMP
PL ATE CLAMP
PL ATE CLAMP
MAGNE T CLAMP
UPPER CLAMP
HOLDER CLAMP
BASE MAIN
BASE ASSEMB LY TR AY
(L1)
(C2)
(C1)
(H1)
(B)
BASE TR AY
A
Fig. 4-1 Fig. 4-2
Note
Note
Note