12
Connections (Cont’d)
Speaker System Connection
Speaker Positioning
• Center speaker
It is ideal that the center speakers and front speakers are
same height. But normally place it above or below the televi-
sion.
• Rear speakers
Place left and right behind the listening area. These speak-
ers recreate sound motion and atmosphere required for sur-
round playback. For best results, do not install the rear
speakers too far behind the listening position and install
them at or above the level of the listener’s ears. It is also
effective to direct the rear speakers towards a wall or ceiling
to further disperse the sound.
In the case of a smaller room size, if the audience is near to
the rear wall set the rear speakers opposite each other, and
set the rear speakers above 60-90cm than the listener’s
ears.
• Subwoofer
This can be placed in any front position.
Center Speaker
Front
Speaker
(Left)
Speaker Positioning Example
Rear
Speaker
(Left)
Rear
Speaker
(Right)
Front
Speaker
(Right)
Subwoofer
In the case of normal position use the 6 speakers (2 front speakers, center speaker, 2 rear speakers and subwoofer).
If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a
subwoofer.
• Front speakers
According to your listening position set up the speakers for equal distance. And by hearing position set up the interval
between speakers to 45 degree.
Notes
Be sure to match the speaker cord to
the appropriate terminal on the com-
ponents: + to + and – to –. If the cords
are reversed, the sound will be distort-
ed and will lack base.
If you use front speakers with low
maximum input rating, adjust the vol-
ume carefully to avoid excessive out-
put on the speakers.
Do not disassemble the front cover of
supplied speaker.
Connect the speakers using the supplied
speaker cords by matching the colors of
the terminals and those of the cords. To
obtain the best possible surround sound,
adjust the speaker parameters (distance,
level, etc.).
If you feel lack of bass
frequency
Connect an active subwoofer
to the WOOFER OUT
connector using a monaural
audio cord (not supplied).
When you connect an active
subwoofer, disconnect the
woofer from the WOOFER
speaker connector.
