206-3483
P A G E 4 6
PIP-Selecting Viewing Sources
Press PIP to place the PIP inset on the main screen.
Press TV/VCR Source on remote control to switch input
source for the PIP inset.
Or, go to the Source menu, highlight PIP Source and use
RIGHT/LEFT arrows to select PIP inset source. Highlight
Main Source and use RIGHT/LEFT arrows to select main
picture source.
Main Screen or PIP Inset Sources
You can use:
Antenna/Cable
Video 1/S-Video 1
Video 2/S-Video 2 etc.
Where “sources” are connected
You can use any input source for the PIP inset that is
connected to the TV connections panel, except Component
Video. (Antenna/Cable, Video 1, or Video 2 etc.)
Note: If you used the S-Video 1, or the S-Video 2 input,
S-VHS 1, or S-VHS 2 will appear as available sources
instead of Video 1, or Video 2.
If no equipment is connected to a source you select for
the PIP inset, or if it is turned Off, the PIP inset will be
black.
Component Video cannot be used as a PIP source.
1
2
COMPONENT VIDEO
Y
CR
CB
R
L
S-VIDEO 1 VIDEO 1 R-AUDIO L-/MONO
VARIABLE
AUDIO OUTPUT
R
L
S-VIDEO 2 VIDEO 2 R-AUDIO L-/MONO
AUDIO/VIDEO OUT
VIDEO
R -AUDIO-L
AUDIO/VIDEO OUT
VIDEO
R -AUDIO-L
AUDIO IN
R -AUDIO-L
AUDIO/VIDEO OUT
VIDEO
R -AUDIO-L
Camcorder
VCR
S-Video VCR
DVD Player
Other
PIP Source
Can be Antenna/Cable and
any equipment connected to
the audio/video input jacks;
such as Video 1, Video 2,
S-Video 1, S-Video 2, etc.
Main Picture Source
Can be Antenna/Cable and
any equipment connected to
the audio/video input jacks;
such as Video 1, Video 2,
S-Video 1, S-Video 2, etc.
Typical Equipment Sources
Choosing sources to watch for the Main picture
and the PIP Inset picture