6
806310NZ v1.06 08.19 CW ChillMaster & EconoMaster
Never use strong, corrosive or abrasive cleaning materials. Stainless steel surfaces
will show scratches if an abrasive cleaning product is used.
Wipe clean the outer surfaces with a sponge or a soft cloth using a mild soap and
water.
The louvres on the sides of the unit need to be kept free of dust and lint to permit
free flow of air through the vents. Check at least monthly, and dust or vacuum if
required.
Cleaning
There are dangerous voltages present within the unit. All service work must only be
carried out by a suitably qualified and experienced service person.
Before calling for service, check that both the water and electricity supplies are
turned ‘ON’ and OK.
Call a licenced electrician, plumber, or Zenith free call in New Zealand on 0800 558
055, for assistance, service, spare parts, or enquiries.
Filter Timer Module (ChillMaster only)
The filter timer module is a microcontroller-programmable, extended duration
timer. It is programmable from one to six months in duration.
A red Light Emitting Diode (LED) that shows through the front label will flash once
per second when the selected filter time has elapsed, as a reminder to replace the
filter. The unit will stay in this state until the batteries are exhausted.
The 2x AAA batteries should be replaced when filter is replaced.
To reprogram the filter timer module, first remove the front panel of the
ChillMaster. The filter timer module is located inside.
Remove the batteries and locate the switch bank, mounted on the reverse side to
the battery holder of the timer module’s printed circuit board.
Referring to the table below, select the appropriate sequence. Set the switches to
ON or OFF positions by depressing the end of each switch with a small instrument
such as a pen or small screw driver.
Replace the batteries and the front panel of the ChillMaster.
Note:
Factory Setting is 6 months
TIME
MONTHS
SWITCH 1
SWITCH 2
SWITCH 3
SWITCH 4
1
ON
OFF
OFF
OFF
2
OFF
ON
OFF
OFF
3
ON
ON
OFF
OFF
4
OFF
OFF
ON
OFF
5
ON
OFF
ON
OFF
6
OFF
ON
ON
OFF
TEST
X
X
X
ON
(X = Any position)
Servicing