Zenith B-9000 Series Скачать руководство пользователя страница 16

Страница: 16 / 16

FAILURE, IMPROPER SELECTION OR IMPROPER USE
OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED

HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Zenith

Pumps, its subsidiaries and authorized distributors provide product

and/or system options for further investigation by users having

technical expertise. It is important that you analyze all aspects of

your application and review the information concerning the product

or system in the current product catalog. Due to the variety of

operating conditions and applications for these products or systems,

the user, through its own analysis and testing, is solely responsible

for making the final selection of the products and systems and

assuring that all performance, safety and warning requirements

of the application are met.

The products described herein, including without limitation,

product features, specifications, designs, availability and pricing,

are subject to change by Zenith Pumps and its subsidiaries at any

time without notice.

WARNING

Zenith

Pumps

1710 Airport Road

Monroe, NC 28110

Phone: 704-289-6511 • Fax: 704-289-9273

[email protected] • www.zenithpumps.com

A Colfax Buisiness Unit

ISO 9001: 2000 Registered

Содержание B-9000 Series

















Результаты поиска

Содержание B-9000 Series

Отзывы:

Похожие инструкции для B-9000 Series

Бренды по названию

Популярные бренды

Zenith B-9000 Series, Установка, уход и техническое обслуживание

Результаты поиска

Содержание B-9000 Series

Отзывы:

Похожие инструкции для B-9000 Series

Бренды по названию

Популярные бренды