Zenith 42PX2D-UC, Инструкция по установке и эксплуатации, Гарантия

Страница: 22 / 60

22 Plasma TV
Operation
T
T
urning the TV On
urning the TV On
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the POWER , TV / VIDEO , CH (
D
/
E
) button on the TV or
press the POWER , TV / VIDEO , CH (
D
/
E
) , Number (0 ~ 9) button on the remote control .
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use D
/
E button to select the OPTION
menu.
2. Press the G button and then use
D / E
button to select Language .
3. Press the G button and then use
D / E
button to select your desired language.
From this point on, the on-screen menus will be shown in the selected lan-
guage.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
Notes:
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
• After turning on the TV, it will take up to a week for the TV Guide On Screen system to receive full
listings data.
2. Select the viewing source by using TV/VIDEO button on the remote control.
This TV is programmed to remember which power state it was last set to, even if the power cord is
out.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to
standby mode.
TV Setup
TV Setup
On-screen Menus Language Selection
On-screen Menus Language Selection