804546NZ - BW_HB Small_09.18 v1.02
Page 23 of 24
Error Code Error meaning
Solutions
0
Boiling sensor is open circuit
Call Zenith Service
1
Boiling sensor has a short circuit
Call Zenith Service
2
Steam Sensor is open circuit
Call Zenith Service
3
Steam sensor has a short circuit
Call Zenith Service
4
Calibration error !!
Call Zenith Service
5
Boiling calibration error, insufficient steam tempera-
ture when boiling sensor registered over 90°c
Call Zenith Service
6
Max temp error. The maximum temperature reached
is lower than 92°c during the calibration process.
Check your height above sea level.
Call Zenith Service.
7
Over temp error. A constant temperature over 103°C
has been reached during the calibration process.
Make sure there is an airgap in the vent line.
Call Zenith service.
8
Calibration error, water temperature is falling or con-
stant when maximum element power is applied.
Call Zenith service.
Fault Codes Table
End of life disposal
In order to help preserve our environment we ask that you dispose
of this product correctly. Please contact your local city council for
collection centre details.
Cleaning
Cleaning Case
Do not use strong, corrosive, spray or abrasive cleaners. Clean the
case with a soft cloth or sponge and mild soapy water.
