Zenith Air SMC, Инструкция по установке и эксплуатации

Страница: 34 / 50

34
V. INSTALLING PROCEDURES
THE FOLLOWING SHOULD BE ALWAYS OBSERVED FOR SAFETY
• Be sure to read “THE FOLLOWING SHOULD BE ALWAYS OBSERVED FOR SAFETY” before installing the air
conditioner.
• Be sure to observe the cautions specified here as they include important items related to safety.
• The indications and meanings are as follows.
• After reading this instructions, be sure to keep it together with the owner’s manual in a handy place on the
customer’s site.
WARNING: Could lead to death, serious injury, etc.
!
CAUTION: Could lead to serious injury
in particular environments when operated incorrectly.
!
■
Do not install it yourself (customer).
Incorrect installation could cause injury due to fire, electric
shock The unit falling or leakage of water Consult The dealer
from whom you purchased The unit or special installer.
■
Install the unit securely in a place which can bear
the weight of the unit.
When installed in an insufficiently strong place, The unit could
fall causing injury.
■
Use the specified wires to connect the indoor and
outdoor units securely and attach the wires firmly
to the terminal board connecting sections so the
stress of the wires is not applied to the sections.
Incorrect connection and fixing could cause fire.
■
Attach the electrical part cover to the indoor unit
and the service panel to the outdoor unit securely.
If the electrical part cover of The indoor unit and/or the servi-
ce panel of The outdoor unit are not attached securely, it could
result in a fire or electric shock due to dust, water etc.
■
Perform the installation securely referring to the
installation instruction.
Incorrect installation could cause a personal injury due to fire,
electric shock the unit falling or leakage of water.
■
Perform electrical work according to the ins-
tallation manual and be sure to use an exclusive
circuit.
If the capacity of the power circuit is insufficient or there is
incomplete electrical work, it could result in a fire or an elec-
tric shock.
■
Check that the refrigerant gas does not leak after
installation is completed.
■
Be sure to use the part provided or specified
parts for the installation work.
The use of defective parts could cause an injury due to a fire,
electric shock, The unit falling, etc.
WA R N I N G :
!
■
Do not install the unit in a place where an
inflammable gas leaks.
If gas leaks and accumulates in The area surrounding The unit, it
could cause an explosion.
■
Perform the drainage/piping work according to
the installation instruction.
If There is a defect in The drainage/piping work, water could
leak from The unit and household goods could get wet and be
damaged.
C AU T I O N :
!