TD 92022GB
2002-11-13/ Rev. A
Installation Guide
H/U952T Terminal Transmitter
4
Use a screwdriver or similar to release the cover by applying a light pressure to the two
snap catches (1) and remove the cover (2).
Figure 4. Releasing the cover.
Note:
The internal metal shield should not be opened.
3.2
Mounting together with Other Units
Figure 5. Mounting with other units.
1
Remove upper and lower covers. Fasten together the lower rectangular covers of
adjacent units (1).
2
Fasten each unit to the wall with three screws, see figure
3.3
Addressing the Transmitter
• Select the address by setting the address selector switch SW100, see the System
Installation document under
Addressing.
Note:
1) The address for H/U952T must
not
be 00, nor the same as any other 900-unit D-bus
address.
2) In case the system includes speech, the transmitter must be in the address range for
speech transmitters (hex address 80-FF).
1
1
2
1
1
