Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel and Vingtor-Stentofon products are developed and marketed by Zenitel.
The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice. ZENITEL PROPRIETARY. This document and its
supplementing elements contain Zenitel or third-party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized
reproduction, in part or in whole, must include this legend: Zenitel – All rights reserved.
DOC NO.
DATE
www.zenitel.com
17.1.2022
Electrical Connections
8 Mounting Cable Gland
Remove two blind plugs and insert one
M16 Ex e and one M25 Ex e cable gland.
Make sure to tighten sufficiently to attain
IP-66 rating for watertightness, but be
aware of plastic material limitations.
Related Documentation
Document No.
Documentation
A100K12133
Exigo & Turbine Ex Maintenance Procedures
A100K11460
Exigo Technical Manual
A100K11958
Flowire Installation & Configuration Manual
A100K11471
Exigo User Manual
A100K11194
Turbine Stations Configuration Manual
Accessories & Spare Parts
Item Number
Item Name
Item Description
AK5850HS
AK5850HS
Ex-Approved Headset with plug
1008150025
TAX-2B
Ex-Approved Cable for Headset with PTT Button
1008150030
TAX-3
Ex-Approved Handset with PTT, unterminated
1023533511
EMMAX-1H
Exigo Handheld Industrial Ex Microphone
1000150040
TAX-4
Cable gland kit (10x) for TFIX and EAPFX
1023594100
EGA-1
Button Protection Covers (10x)
1008140250
TA-25
M6 screw kit
Specific Conditions of Use:
• The Ex Products and associated cable glands are tested for low risk
of mechanical hazard and shall be protected against higher impact
energy levels if used.
• The cable glands shall be mounted according to the manufacturer’s
instructions, and additional clamping of the cable may be needed.
•
Other certified cable glands than supplied with the product may be
mounted and used according to the manufacturer’s instructions.
For complete documentation, see
Installation & Maintenance Procedures for Exigo Ex
Access Panels & Turbine Ex Intercoms
, Document no. A100K12133.
DNV 21 ATEX 04699X
IECEX DNV 21.0097X
A100K12140
Ex intercoms and access panels -V2- CE
EU Declaration of Conformity
The following equipment is declared to be in conformity according to the following
directives and international standards when the equipment is installed and used in a
manner consistent with the manufacturer’s recommendations and reference documents.
Manufacturer:
Zenitel Norway AS
Bromsveien 17, 3183 Horten, Norway
Type of equipment:
Ex intercom stations and access panels
Product models:
Type name
Product number
TFIX-1-V2
1008123110
TFIX-2-V2
1008123120
TFIX-3-V2
1008123130
EAPFX-1-V2
1023221611
EAPFX-6-V2
1023221616
Relevant EU directives:
Directive 2011/65/EU
The restriction of the use of certain hazardous
substances in electrical and electronic equipment.
Directive 2014/35/EU
Electrical equipment designed for use within certain
voltage limits.
Directive 2014/30/EU
Electromagnetic compatibility
Directive 2014/34/EU
Equipment and protective systems intended for use
in potentially explosive atmospheres
Harmonised standards applied:
Electromagnetic Emissions:
(by Council Directive 2014/30/EU)
EN IEC 61000-6-3:2021
EN IEC 61000-6-4:2019
Electromagnetic Immunity:
(by Council Directive 2014/30/EU)
EN 50130-4:2011 + A1:2014
EN IEC 61000-6-2:2019
Environmental:
EN/IEC 60945:2002 + Cor1:2008
Explosive atmospheres:
(by Council Directive 2014/34//EU)
EN 60079-0:2018
EN 60079-7:2015 + A1:2018
EN 60079-11:2012
EN 60079-18:2015 + A1:2017
Marking:
II 2(2)G Ex eb ib mb [ib] IIC T4 Gb
Ta: -20°C to +55°C
Type Examination Certificate:
DNV 21 ATEX 04699X, NB 2460
The manufacturer is solely responsible for making this declaration. The technical file is
maintained at the company address listed above.
Name, Surname
Audun Kolle
Position/Title
Product Manager
Place of issue
Horten
Date of issue
16.12.2021
The relevant certificates and declarations of conformity may be
downloaded from: www.zenitel.com/customer-service/library
1
Internal Mic+
2
Internal Mic -
3
Signal GND
4
Audio Accessory S
5
Audio Accessory Speaker -
6
Audio Accessory Microphone Mic +
7
Audio Accessory Microphone Mic -
8
Audio Accessory Push To Talk (PTT)
9
Audio Accessory Hook
10 Audio Accessory GND PTT/Hook
11 Internal Louds
12 Internal Loudspeaker -
13 GPI 1 External Push Button
24-48V DC
Flowire Bus
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24 25
INT
Accessory
INT Push Buttons
EXT
EXT
Relay
In order to ensure the required minimum degree of
protection, the cable glands must be tightened securely.
Over-tightening can impair the degree of protection and
damage the Ex unit.
When tightening the cap nut of a cable gland, a suitable tool
shall be used to prevent the gland from twisting.
Ex related document.
All changes must be approved
by Ex responsible in Zenitel.
14 GND External Push Button
15 GPI 2 External Push Button
16 GND External Push Button
17 External Louds
18 External Loudspeaker -
19 Signal GND
20 Relay COM
21 Relay NO
22 Flowire PLC1 +
23 Flowire PLC1 -
24 Flowire PLC2 +
25 Flowire PLC2 -
The apparatus shall be supplied with Safety
Extra-Low Voltage (SELV) power supply of 24-48
VDC, 2A.
