Zenit RH-1300, Инструкция по эксплуатации

Страница: 4 / 12

4
17. Avoid unintentional starting. Do not carry a plugged in tool with a finger on the
switch. ensure switch is off when plugging in.
18. use outdoor extension leads. When tool is used outdoors, use only extension cords
intended for outdoor use.
19. stay alert. Watch what you are doing. use common sense. Do not operate tool when
you are tired.
20. check damaged parts. Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. check for alignment of moving parts, free running of
moving parts, breakage of parts, mounting and any other conditions that may affect its
operation. a guard or other part that is damaged should be properly repaired or replaced
by an authorized service center unless otherwise indicated in this instruction manual.
Have defective switches replaced by an authorized service center. Do not use the tool if
the switch does not turn it on and off.
21. Warning use only accessories or attachments recommended in this instruction man-
ual or in the catalogue of ZENIT ТМ.
22. Have your tool repaired by a qualified person. This electric tool is in accordance
with the relevant safety requirements. Repairs should only be carried out by qualified
persons using original Zenit tM spare parts. otherwise this may result in considerable
danger to the user.
Safety precautionS on uSing rotary hammer
• Always wear ear protection when using the tool for extended periods.
• Never touch the tool bit with bare hands after operation.
• Before drilling into walls, ceilings or floors, ensure that there are no concealed
power cables inside.
• Always keep the tool handle and the side handle firmly. Otherwise the counter
force may lead to inaccurate or even dangerous operation.
DeScription
1. «on/off» switch 3.side handle
2. rotary hammer functions switch 4. Drill chuck