Zenit JS-900 PROFI, Инструкция по эксплуатации

Страница: 4 / 8

4
breakage of parts, mounting and any other
conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorized
service center unless otherwise indicated
in this instruction manual. Have defective
switches replaced by an authorized service
center. Do not use the tool if the switch does
not turn it on and off.
21. Warning Use only accessories or attach-
ments recommended in this instruction manual
or in the catalogue of ZENIT ТМ.
22. Have your tool repaired by a qualified per -
son. This electric tool is in accordance with the
relevant safety requirements. Repairs should
only be carried out by qualified persons using
original ZENIT TM spare parts. Otherwise
this may result in considerable danger to the
user.
safety precautions on usinG jiG
saw
This Jig Saw employs a high-ower motor. If
the machine is used continuously at low speed,
an extra load is applied to the motor which can
result in motor seizure. Always operate the
power tool so that the blade is not caught by
the workpiece during operation. Always adjust
the blade speed to enable smooth cutting..
Description
1
2
3
7
9
6
4
5
8
1. «On/Off» switch;
2. Stopper;
3. Speed control;
4. Saw clamp;
5. Protective cover;
6. Switch of the pendular move mode;
7. Dust hose.
8. LED switch;
9. Switch of the dust removal mode;
technical specifications
Model JS-900 profi
Rated voltage 220-240 V
Rated frequency 50-60 Hz
Rated power 900 W
Cutting depth in wood 80 mm
Cutting depth in metal 8 mm
Cutting angle (left/right): 0-45
0
Rod stroke 0-3000 spm
applications
Cutting various lumber and pocket cutting.
Cutting mild steel plate, aluminum plate, and
copper plate. Cutting plastics, such as phenol
resin and vinyl chloride. Cutting thin and soft
construction materials.
Cutting stainless steel plate.
prior to operation
1. Power source.
Ensure that the power source to be utilized
conforms to the power requirements specified
on the product nameplate.
2. «On\Off» switch.
Ensure that the power switch is in the OFF
position. If the plug is connected to a receptacle
while the power switch is in the ON position,
the power tool will start operating immediately,
inviting serious accident.
3. Extension cord.