3
General safety precautions
WarninG! When using electric tools, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and personal injury, including the
following.
read all these instructions before operating this product and save these instructions.
for safe operations:
1. Keep work area clean. Cluttered areas and benches invite injuries.
2. consider work area environment. Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work area well lit. Do not use power tools
where there is risk to cause fire or explosion.
3. Guard against electric shock. avoid body contact with earthed or grounded surfaces.
(e.g. pipes, radiators, ranges, refrigerators).
4. Keep children and infirm persons away. Do not let visitors touch the tool or extension
cord. all visitors should be kept away from work area.
5. store idle tools. When not in use, tools should be stored in a dry, high or locked up
place, out of reach of children and infirm persons.
6. Do not force the tool. It will do the job better and safer at the rate for which it was
intended.
7. Use the right tool. Do not force small tools or attachments to do the job of a heavy
duty tool. Do not use tools for purposes not intended.
8. Dress properly. Do not wear loose clothing or jewelry; they can be caught in moving
parts. rubber gloves and non-skid footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.
9. use eye protection. also use face or dust mask if the cutting operation is dusty.
10. connect dust extraction equipment. if devices are provided for the connection of
dust extraction and collection facilities ensure these are connected and properly used.
11. Do not abuse the cord. never carry the tool by the cord or yank it to disconnect it
from the receptacle. Keep the cord away from heat, oil and sharp edges.
12. secure work. use clamps or a vise to hold the work. it is safer than using your hand
and it frees both hands to operate tool.
13. Do not overreach. Keep proper footing and balance at all times.
14. Maintain tools with care. Keep cutting tools sharp and clean for better and safer
performance. follow instructions for lubrication and changing accessories. inspect tool
cords periodically and if damaged, have it repaired by authorized service center. inspect
extension cords periodically and replace, if damaged. Keep handles dry, clean, and free
from oil and grease.
15. Disconnect tools. When not in use, before servicing, and when changing accessories
such as blades, bits and cutters.
16. Remove adjusting keys and wrenches. Form the habit of checking to see that keys
and adjusting wrenches are removed from the tool before turning it on.
