Zenit Powertools ED-550 PROFI, Инструкция по эксплуатации

Страница: 3 / 8

3
General safety precautions
WARNING! When using electric
tools, basic safety precautions should
always be followed to reduce the risk of
fire, electric shock and personal injury,
including the following.
Read all these instructions before operat-
ing this product and save these instruc-
tions.
For safe operations:
1. Keep work area clean. Cluttered areas
and benches invite injuries.
2. Consider work area environment. Do
not expose power tools to rain. Do not
use power tools in damp or wet loca-
tions. Keep work area well lit. Do not use
power tools where there is risk to cause
fire or explosion.
3. Guard against electric shock. Avoid
body contact with earthed or grounded
surfaces. (e.g. pipes, radiators, ranges,
refrigerators).
4. Keep children and infirm persons
away. Do not let visitors touch the tool
or extension cord. All visitors should be
kept away from work area.
5. Store idle tools. When not in use, tools
should be stored in a dry, high or locked
up place, out of reach of children and
infirm persons.
6. Do not force the tool. It will do the job
better and safer at the rate for which it
was intended.
7. Use the right tool. Do not force small
tools or attachments to do the job of a
heavy duty tool. Do not use tools for
purposes not intended.
8. Dress properly. Do not wear loose
clothing or jewelry; they can be caught
in moving parts. Rubber gloves and non-
skid footwear are recommended when
working outdoors. Wear protecting hair
covering to contain long hair.
9. Use eye protection. Also use face or
dust mask if the cutting operation is
dusty.
10. Connect dust extraction equipment. If
devices are provided for the connection
of dust extraction and collection facilities
ensure these are connected and properly
used.
11. Do not abuse the cord. Never carry
the tool by the cord or yank it to discon-
nect it from the receptacle. Keep the cord
away from heat, oil and sharp edges.
12. Secure work. Use clamps or a vise to
hold the work. It is safer than using your
hand and it frees both hands to operate
tool.
13. Do not overreach. Keep proper foot-
ing and balance at all times.
14. Maintain tools with care. Keep cut-
ting tools sharp and clean for better and
safer performance. Follow instructions
for lubrication and changing accessories.
Inspect tool cords periodically and if
damaged, have it repaired by authorized
service center. Inspect extension cords
periodically and replace, if damaged.
Keep handles dry, clean, and free from
oil and grease.
15. Disconnect tools. When not in use,
before servicing, and when changing ac-
cessories such as blades, bits and cutters.
16. Remove adjusting keys and wrench -
es. Form the habit of checking to see that
keys and adjusting wrenches are removed
from the tool before turning it on.
17. Avoid unintentional starting. Do not
carry a plugged in tool with a finger on
the switch. Ensure switch is off when
plugging in.
18. Use outdoor extension leads. When
tool is used outdoors, use only extension