Zenisu Keisoku ZS-6822, Руководство пользователя, Страница: 22 / 25

- 22 -
6.4.3. T command

Function
Pulse is output to the control signal “TRG”.

Format
T
CR LF

Return value
OK
CR LF
： Pulse output is completed.
NG
CR LF
： Pulse output error.
6.4.4. C command

Function
Pulse is output to control signal “CLR”.

Format
C
CR LF

Return value
OK
CR LF
： Pulse output is completed.
NG
CR LF
： Pulse output error.
6.4.5. D command

Function
I/O setting of 4 ports is executed.
All ports are set to input when turn on the power of ZS-6822.

Format
Dxxxx
CR LF
：
Set in the order of port_1, port_2, port_3, port_4 after “D”.
“x” is “I” for IN for input, “O” for OUT for output.

Return value
OK
CR LF
： Setting is completed.
NG
CR LF
： I/O setting error, data character error.
6.4.6. P command

Function
The pulse width of the control signals "STB" "TRG" "CLR" can be selected from 10µs,
100µs, 1ms, 10ms, 100ms.
When powering on the ZS - 6822, it is set to 10µs.

Format
P ｘ
CR LF
： “x” is number. The assignment of number is as follows.
0 ・・・ 10 μ s, 1 ・・・ 100 μ s, 2 ・・・ 1ms
3 ・・・ 10ms, 4 ・・・ 100ms

Return value
OK
CR LF
： Setting is completed.
NG
CR LF
： Setting error, data character error.