Zenisu Keisoku ZS-6144AF, Руководство пользователя

Страница: 7 / 9

6
6. Functions
GP-IB address, RS-232C communication protocol, and operation mode are set with
the switch on the board. Take the screws at the 4 corners and remove the top cover
to make the setting. The LED indicates the communication status of GP-IB and
RS-232C.
Note) There is a product with SW1(4 bit dip switch) mounted on the left side of SW2, but please
use this switch in its initial state.
6-1 ADR switch
（
SW3
）
Specify the GP-IB address and controls.
※ Is initial setting.
ON(1)
D1 D2 D3 D4 D5 D6 D7 D8
Xパラメータフロー制御
制御線フロー制御
SRQ機能
GP-IB機器アドレス設定（0～30）
※ ※ ※ ※ ※
※
※ ※ OFF(0)
1 2 4 8 16
注1
ON：有り
OFF：無し
Note) Do not set “31” as GP-IB address.
X parameter flow
Control line
SRQ function
GP-IB address
Enable
Disable
(0 to 30)