ZENER 8000
IM00168
Specification
Standards Compliance
When used with ZENER 8000 inverter
Complies with the Australian EMC
framework requirements
Adjustable speed electrical power drive
systems Part 3: EMC requirements and
specific test methods
IEC 61800.3
AS 61800.3
Current Ratings
Model
Current Rating
Heat Dissipation
@2KHz Audible frequency
Continuous
@ 40°C
Intermittent
60s
AHO0070
7.0A
9.0A
AHP2200
220A
242A
AHP3150
315A
347A
AHP3900
390A
429A
AHP4900
490A
539A
630W
Operation at higher Audible Frequency or at speeds >50Hz may require derating. The filter is matched to the ZENER
8000 to allow for operation at temperatures above 40°C.
Voltage Rating
380 to 480Vac, -15% +10%, 3 phase, 0-200Hz
Maximum rate of change of voltage dv/dt
150V/μs
Peak motor terminal voltage with 100m of
motor cable
Typically 120% of peak mains voltage
Enclosure
Open chassis – IP00
Storage temperature
-20°C to 70°C
Operating environment temperature
0°C to 50°C as per drive rating / temperature
(Consult Zener for higher ratings)
Relative Humidity
5 to 95% non-condensing
Altitude
0 to 1000m
