ZE-NC514
11
BASIC OPERATIONS
DISPLAY SYSTEM TIME
■
Press and hold the [DISP] key on the front panel to switch the display information
between system time and playing source when the TFT monitor is closed.
USING THE TFT MONITOR
Open/Close monitor
■
Press the [OPEN/CLOSE] key on the front panel or remote control to push the display
panel out or in.
Change the monitor tilt angle
■
Due to the inherent character of LCD panels, you will get different vision impressions
when you watch it from different angles. The display angle of this unit can be changed;
hence you can select the best angle where you can get the best vision impression.
■
Press the [TILT] key on the display panel or the remote control to adjust the tilt angle one
step at a time.
■
Press and hold the [TILT] key on the display panel or the remote control to adjust the tilt
angle continuously.
Change aspect ratio
■
Press the [WlDE] key on the display panel or remote control to adjust the aspect ratio.
lmage setting
1. Enter image setting mode
■
Press the [PIC] key on the remote control.
2. Select one item to adjust
■
Press the [
]/[
] keys on the remote control.
3. Adjust the value
■
Press the [
]/[
] keys on the remote control.
4. Exit image setting mode
■
To exit image setting mode, repeat the first step or stop operation for some seconds.
RESET THE UNIT
■
lf the unit can not work correctly, you should reset the unit by pressing the [RESET]
button on the front panel.
Содержание ZE-NES14
Страница 1: ...1 DIN DVD NAVICEIVER WITH MOTORIZED 17 8cm 7 LCD DISPLAY MODEL N0 USER MANUAL English French German...
Страница 41: ...ZE NC514 41 DEVICE CONNECTIONS PARKING BRAKE CABLE CONNECTIONS REVERSE DRIVING CABLE CONNECTIONS Gearbox...
Страница 48: ...48 APPENDIX WIRING CONNECTIONS...
Страница 50: ...ZENEC by ACR AG Bohrturmweg 1 Bad Zurzach Switzerland...