ZENEC ZE-NE3810, Инструкция по эксплуатации

Страница: 11 / 42

ENGLISH
49
MUTE FUNCTION
■
Manually: Press the PWR/VOL rotary knob on the front panel to mute the audio output.
Press the button again to deactivate the mute function.
■
Automatically: The audio output will be muted, if you make a phone call.
AUDIO CONTROL MENU
■
The audio control menu allows you to adjust your audio system to meet your requirements
and the acoustical characteristics of the vehicle. The menu item "SW" is only relevant, if
you have a subwoofer connected to the respective sub pre-out of the unit.
■
Press and hold the SMART DIAL rotary knob
to enter the audio control menu.
■
Touch the icon with the current playing mode
in the upper left corner of the screen to leave
the menu.
■
After 15 seconds without any operation,
the audio menu exits back to current audio
source automatically.

NOTE:
■
Bass and treble settings are only adjustable in "User"-mode.
VIDEO PLAYBACK DISABLED
■
The video playback on the display of the unit is disabled when the car is in motion due to
safety reasons. It's necessary to engage the handbrake to enable the video playback or
the speed of the vehicle doesn't break 3 km/h.
■
The rear camera mode and the M-Zone remain unaffected.
SYSTEM RESET
■
If the unit does not work correctly, you should first try to reset the unit by pressing the
RESET-button on the bottom-right corner of the front panel to reset the processor. The
last adjustments will always be saved.