DEUTSCH
ZE-NC524
27
INSTALLATION
INSTALLATION GUIDE
1. If relevant, remove any other audio system(s) from the car.
2. Perform the required electrical connections:
3. If necessary, connect the hand brake wire to your hand brake contact in order to activate
the video display when playing a DVD (when the car is parked).
4. Connect the wire that activates the rear view camera to the reversing sensor or to a
reversing light. If necessary, connect your reversing camera to the car radio’s reversing
camera input using a video cable (not supplied).
5. Ensure that you now place the USB cable located at the back of the unit in such a way
that it protrudes out of the dashboard or the glove box.
6. Then check that everything works before installing the main unit.
7. Remove the two screws on the top of the unit, otherwise the disc player will not work
properly.
8. Attach the outer trim frame.
If you are not sure how to install this unit correctly, contact a qualifi ed technician.
