ZENEC ZE-NC4110 - MOUNTING INSTRUCTIONS FOR SANTA FE, Руководство пользователя

Страница: 21 / 80

21
ZE-NC4110
1. Current mode of unit. Touch to open the
main menu.
2. Displays the signal strength.
3. The TP button lights up orange
when the radio station provides
traffic announcements.
4. The TA button lights up orange when a
traffic announcement is transmitted.
5. Bluetooth indicator.
6. Current time indicator.
7. When AF and Region are activated,
auto tuning to those stations within the
region is assigned. When AF is activated
and region is deactivated, auto tuning
attempts to fi nd stations without any
region boundary.
8. Touch to tune backwards one step.
9. Touch to activate/deactivate the AF
function. When AF is activated and
a radio signal is too weak, the tuner
automatically switches to the best
available frequency.
10. Touch on the screen to automatically
scan all stations of the current band
to preview stations. Press any button
to stop scanning and listen to the
selected station.
11. Touch to activate/deactivate the AF
function. When TA is activated, the unit
will auto seek an available TP or TA
station. When TA is activated and a traffic
announcement is received, the current
playing source is overridden by the traffic
announcement automatically, if the tuner
was last set to the FM band but not, if
it was last set to the AM band. When
traffic announcement is over, the current
playing source will be resumed.
12. Touch to tune forward one step.
13. Touch to enter the PTY menu, then touch
to select a choice in the PTY menu. The
unit will auto seek the next available PTY
by increasing tuning frequency until the
program type matches the PTY, if no
match is found, the tuner will return to
original radio and "None" is displayed.
14. Touch to seek forward.
15. Touch to switch between the
two submenus.
16. Touch to turn to previous page.
17. Touch to mute.
18. Touch to turn to next page.
19. Current radio band, preset station playing
back and radio frequency indicator.
20. Touch to seek backwards.
21. Preset radio stations: Touch to recall
preset stations or touch and hold to store
a station, (total 6 stations for each band).
22. Displays whether LOC or DX mode
is active.
23. Displays whether mono or stereo sound
is playing. The unit automatically switches
between mono and stereo, depending on
the reception quality of the radio station.
24. Touch to switch between the
two submenus.
25. Touch to change among the following
bands: FM-1, FM-2, FM-3, AM-1, AM-2.
26. Touch to automatically scan and store the
strongest six stations of the selected radio
band. Stations names will automatically
be displayed if AF is activated.
27. Scan the six preset channels of the
current band.
28. Switch to choose between LOC and DX
tuner searching mode.
29. Current radio band, preset station playing
back and radio frequency indicator.