2
CAUTION
● The DAB+ window mount foil antenna has been developed exclusively for use inside the vehicle.
● The antenna must not adveresly affect the driver’s field of vision.
● If your vehicle is equipped with a side airbag, the antenna must not interfere with the airbag functions in
any way.
● The antenna must not be installed on movable glass surfaces such as the side windows or rear window.
● Do not bend or damage the foil antenna.
● The ZENEC system should be installed by an authorised specialist dealer.
Specific knowledge and tools are required for installation. Incorrect installation can damage the vehicle
and the ZENEC system.
● Plastic lever tool
● Optional: cross-head screwdriver (Phillips)
● Optional: flat-blade screwdriver
● Optional: Torx screwdriver (T20)
● Cable ties
NOTE
● The strength of signal reception may be impaired if you install the antenna on infrared reflective glass,
thermal insulation glass, or on surfaces covered with reflective film.
● The signal strength also decreases if the antenna overlaps with another antenna, or if it is near a window
heating wire.
● If you have any questions or problems with the ZENEC system, please contact the retailer where you
purchased it.
TOOLS REQUIRED
No. Item
Quantity
1 Foil antenna
1
2 Amplifier unit (cable length 3.0 m)
1
3 Cleaning cloth
1
SUPPLIED ITEMS
WORKING OUT THE INSTALLATION POSITION OF THE ANTENNA
min. 150 mm
min. 150 mm
A
B
B
Installing the antenna on the left-hand side
Installing the antenna on the right-hand side
(A) = Ceramic line (B) = Earthing foil
