ZENEC Z-E3150, Руководство по установке

Страница: 3 / 6

1
3
3
2
EXAMPLE OF INSTALLATION AUDI A3
REMOVAL WORK AND PREPARATION:
3. To completely remove the factory radio, all the
cables (i.e. main wire harness, antenna cable
etc.) must be unplugged on the backside of the
device. Put the radio aside in a safe place, to
protect it from damage.
1. Unlock the OE factory radio with the unlock tool
(No. 10) contained in the set. You need to insert
all four keys.
2. It should be possible to pull out the radio without
applying brute force.
1. Remove the ignition key and keep it outside the car until the installation is finished.
2. Please wait for about 10 minutes until the CAN bus system is completely shut down, before you start
with the uninstallation of the original device.
3. Now you can start with the uninstallation of the original device.
4. Please switch on the ignition only, once all installation steps are completed and the ZENEC system
is firmly mounted.
NOTE