OPERATION
1. Precautions
a. Check the circuitry and the plug meets all requirements.
b. Set the temperature and time to a comfortable level, normally 60 minutes at
50 - 65
℃
（
122 ºF -140 ºF
）
Note: If ambient temperature is lower than 18.3
℃
(65 ºF), please set the temperature at about
50
℃
(122 ºF); and if ambient temperature is higher than 18.3
℃
(65 ºF), please set the
temperature at about 65
℃
(140 ºF).
c. Make sure you have had sufficient water before the sauna session.
d. After 2 hours of continuous use, shut the sauna down for one hour.
e. To avoid burns, do not touch the heating element.
2. Operation
a. See electrical label on the unit, and plug the sauna into a proper wall outlet. Do not share the
outlet with any other appliances. Plug the unit into the outlet and use the ON/OFF switch to
activate the sauna. Sauna should be unplugged when not in use.
b. Press the temperature button
to increase or decrease the temperature.
The temperature setting will increase or decrease one degree every time the button is
pushed. If pressed for three seconds, the setting will increase quickly. After the sauna reaches
the desired temperature, the heating board turns off.
c. If the sauna becomes too hot or stuffy for you, open the vent in the ceiling or open the front
door.
d. After your sauna session, turn off and unplug the power cable.
e. Press the time button
to set the timer from 5 to 60 minutes. If pressed
for three seconds, the timer will increase quickly. When the display reads ‘05’, the timer will
buzzes then the machine will shut off automatically after 5 minutes. To extend the sauna
session, reset the timer again.
WARNINGS
1. Safety precautions
a.
To avoid fire, do not dry clothes or leave any towels in the sauna.
b.
To prevent burns or electric shocks, do not touch or use metal tools on the net cover of the far
infrared film elements.
8