To Install the Zen WA-100-EP Pen Dome
1. Lubricate the dome port’s double o-ring
seal, and make sure that the o-rings,
their grooves, and the sealing surface of
the housing are completely clean.
2.
Align the Zen Underwater logo on WA-
100-EP at 3 o’clock, and push straight in
to the housing.
3. Rotate the port anti-clockwise 90
degrees until the Zen Underwater logo is
oriented at 12 o’clock.
4. Replace the PT-EP01 port lock & screw.
Warranty
All Zen Underwater products are warranted against defects from manufacturing or material for
a period of one year from the date of purchase. Zen Underwater accepts no liability for any
damage to and defects caused by improper use and/or poor maintenance. It is the
responsibility of the owner to carefully follow the instructions in this manual. Zen Underwater
does not hold responsibility for damage of any nature to any equipment used with or placed
inside this port. Zen Underwater accepts no liability for loss of any captured images or the
inability to capture images even if due to the malfunctioning of this product. This warranty
applies only to products purchased from authorized Zen Underwater Dealers and does not
extend beyond the original retail purchaser. Unauthorized repairs or modifications of this
product will invalidate the warranty.
Warranty Service
In the unlikely event you encounter an issue with this item, please return it for service to:
Zen Underwater Repairs
3320 NE 32
nd
Street
Fort Lauderdale, FL 33308
Toll Free 877-453-8929
Local/International 954-537-00644
Fax 954-537-0645
