·
Hang the shelf onto the center part of the telescopic crossbar.
5
Installing the Shelf
·
Loosen and remove the screws with a proper screwdriver.
·
Fix the hooks to the shelf with the previously removed screws.
·
Tighten the screws.
F
C
4
Installing the Sync Rod
·
Notice
:
Match the red line on the sync rod with the right side of left leg
.
Match the right side of the right knob of the sync rod with the red line on
the rod of the motor.
·
Re-tighten the sync rod using the knob.
·
With the frame positioned upright, turn the knob as shown counterclockwise
to loosen the sync rod.
·
Adjust the sync rod to match the frame’s width then.
1
2
3
B
knob
6
Connecting the Cables
·
Connect the wires to the control unit.
J
Note
: Keep all cables organi
s
ed.
7
Installing the Desktop
·
Remove the protective film from the adhesive rubber pads.
·
Position the rubber pads on the side brackets as shown.
·
Place the desktop on the frame and insert the desktop mounting
screws.
·
Tighten all screws.
G
·
he screws on the hooks
.
Tighten all t
S-B
S-F
S-C
S-E
Need a hand? Call 07 3102 4842
