•
Insert the two side panels (Part K) on the left and right-side channels. Insert the back panel (Part I), with the
grommet hole, in the back channel.
Step 3
–
Assemble Top
•
Attach the pressure corners to each end of two 22” aluminum frames (Part B). Make sure that the fingers from
the corners align with the channels of the frame. (see the first photo)
•
Attach a 46” aluminum frame (Part A) and 46” top door frame (Part D) to on
e of the side frames with the
corners attached. Make sure that the double door track is facing up and the inside channels all align (the logo
should be upside down at this point). The frame and channels should now be in the shape of a U.
•
Attach the other side frame, with the two pressure corners already connected, to the assembled frame. You
should now have a rectangle shaped floor with four fingers facing up.
•
Flip the top screen frame over and insert the four pressure connectors into the frame of the stand.
