4
INSTRUCTION MANUAL
I.
SAFETY INSTRUCTIONS
PLEASE READ ALL THE INSTRUCTIONS BEFORE USING YOUR DIFFUSER, ESPECIALLY THESE
FEW BASIC SAFETY INSTRUCTIONS:
•
The buttons
of this device are not waterproof, please don’t wash the
complete unit
in water and don’t sub
merge it.
• Always stand this diffuser on a hard, flat and level surface to prevent the
escape of essential oils.
Stay away from walls and
sources of heat such as stoves,
radiators, etc.
• Clean the surface
of the diffuser
with a
household product
suitable for
aluminum and
plastic. Do not use
hard
tool to
scratch the surface
.
• Do not plug in nor unplug this diffuser with wet hands.
• Never completely disassemble t
he device.
Don’t leave the diffuser in the sun for long
periods.
• Ke
ep the diffuser out of the reach of children.
• Please use essential oils suitable for diffusion.
•
Only use with the adapter supplied.
• Unplug the devi
ce before cleaning it, or any other operation.
• If the power supply cord is damaged, it must be replaced by a special or similar cord
available from your supplier or his after sales service department.
•
Check that the voltage of your electricity supply corresponds to that of the device.
•
Use in an environment ranging between 10°C and 30°C.
•
Indoor use only.
•
Store the device in a clean, dry place, out of the reach of children, having cleaned and
dried it.
This device is not designed to be used by people, including children, whose physical, sensory or
mental capacities are not fully developed, or people who lack the experience or knowledge to use it
properly unless they are monitored by someone who is responsible for their safety or they are able
to follow prior instructions concerning the use of the device.
Size of product: 10 x 10 x 20,5 cm
Material: Aluminum and PP
Input : AC100-240V 50/60Hz Output : DC5V 1A
II.
INSTRUCTIONS
1. Insert gently the foot of the glass in the rubber ring at
the center of the base.
2. Pour a few drops of essential oils in the glass (10 to 20
drops are enough) and never immerse the nebulizer
inside (the vertical glass located in the central at the
bottom of the glass) which would cause the immediate
dysfunction of your diffuser.
DO NOT pour any liquid in nor on the rubber ring or the base.
3. Put the glass cap (optional) to avoid dust.
4. Connect the diffuser with the transformer.
EN