2.
Assemble the three pole sections.
Ensure the pole does not snap together.
It is important that the poles are fully
inserted into the ferrules. If the ferrules
do not connect together correctly they
can cause damage when tensioned.
10.
Peg out all remaining peg points
and guys ropes, pegging at a 45
o
angle.
9.
Connect the fly to the inner by
connecting the side release
buckles at the end of each pole
line.
3.
Insert the pole ends of the two longer
GREY
poles into the eyelets in the
GREY
webbing
found at each corner of the inner.
1.
Clear your site making sure there
are no sharp objects. Try to get a
site that is as flat as possible.
Stretch out the inner tent.
8.
Thr
ow the flysheet
over the inner and fasten
the Velcro ties found on
the inside of the fly
around the pole lines.
7.
Peg out the inner tent. Try to
tension the floor so that it sits flat.
Insert the pegs at a 45
o
angle.
2x
1x
4.
Connect the inner to the
frame by connecting the
c-clips that run along the
main cross seams of the inner
tent.
6.
Connect the inner to the
frame by connecting the c
clips that run along the front
seam of the inner tent.
5.
Insert the pole ends of the remaining
RED
pole into the
eyelets on the
RED
webbings found at each side of the
inner.